Procedure To Reset Canon MP170 Printer Model

The reset procedure for Canon MP170 Printer doesn’t vary too much in relation to the Canon MP models
In case you need to reset Canon MP170 Printer, then I present the solution in two different situations, one more straightforward than the other, but just as effective to continue using our canon MP170 printer normally.

Method 1 to reset Canon MP170 printer: If you display the message that the cartridges are empty.

• First you send a print job, and a message appears "the cartridges are empty"
• Now you must hold down the button for 10 seconds of RESUME / CANCEL RESET / CANCEL
• Start the cleaning cycle, after this print normally, this error message is generally displayed after installing a new ink cartridge, or if we had refilled cartridges.

Method 2 to reset Canon MP170 printer: if you have ink counter Full
This procedure must done in case the previous one doesn’t work.
• Turn off the printer
• Press the ON / OFF button while pressing the STOP / RESET "STOP / RESET" (contains a circle with an inverted triangle)
• Still holding the ON / OFF when the LED turns green, you must release the STOP / RESET and press it twice .
• Release both buttons, the printer is in "SERVICE MODE".
• When the LED ON / OFF switches to green, press the STOP / RESET 4 times
• Turn off the printer by pressing twice ON / OFF
• Turn the printer back ON / OFF, the lights stay flashing orange.

more computer tips here.